Noctua NC-U6 - Manual (Page 2)

Protecting chips without heat-spreaders
If your chip doesn't have a heat-spreader, please use the
supplied spacer foam:
Attaching the heatsink to the chip
Place the heatsink onto the chip and push the push-pins into
the mounting holes or hook the tips of the mounting
brackets into the mainboard's fastening hooks.
Caution: Don't put the spacer foam onto chips with
heat-spreaders!
Adjusting the heatsink
If the NC-U6 touches other components such as graphic cards,
CPU coolers or capacitors, you can turn it by up to 120° in
order to evade compatibility issues.
Congratulations! Now, your
Noctua NC-U6 cooler is ready
for operation!
NC-U6 Chipset Cooler
Installation Manual
Noctua NC-U6 | Installation Manual | 2006-08-V1 | www.noctua.at | [email protected]