Vge1, Series, Fer1 – Northern Connectors Souriau VGE1 / FER1 Ruggedized Metal MIL-DTL-5015 & VG 95234 Connectors User Manual
Page 4
4
VGE1/
FER1
Series
Technical features & benefits
• Ruggedized full metal reverse bayonet connector
- Enabling 500 mating-unmating without wear out thanks to
a stainless steel wear pin located at the critical point of mating.
- Secure locking device: audible “click” when mating;
visible yellow dot to indicate end of mating.
• Dynamic* IP67
- Protected against the effects of temporary
immersion between 15 cm and 1 m
(duration of the test: 30 min).
* The connector remains sealed while the cable
is moving. For rates IP68 and IP69K: consult us.
• Up to 500 hours salt spray resistance
- can be used in very severe environment thanks to Zn-Co plating.
• High performance signal transmission
- TRIM TRIO contact.
- 360° shell Shielding permit to decrease all signal perturbations.
• In accordance with railway standards
- As per the French railway standard NFF 61 030
and the fire & smoke standards NFF 16 101, NFF 16 102.
Stainless steel wear pin.
Visible yellow dot.
15 cm
1 m maxi