Part number creator, Ip67 filter d-sub connectors – Northern Connectors Conec IP67 D-Sub Filter Connectors User Manual
Page 3
F
9 P
M
4 B
O
6 S T
A
0
3
X
0
5|2
Part Number Creator
Product Line
4* = Shell brass tin plated with plastic frame or without frame
6
= Shell brass tin plated with metal frame (Standard)
(*on request)
Variations
STF = D-Subminiatur Standard filtered
HDF = D-Subminiatur High Density filtered
No. of pos. for STF
No. of pos. for HDF
09 = 09 pos.
15 = 15 pos.
15
= 15 pos.
26 = 26 pos.
25 = 25 pos.
44 = 44 pos.
37 = 37 pos.
62 = 62 pos.
50 = 50 pos.
78 = 78 pos.
P
= Plug connector (Standard)
(Socket connector on request)
Capacitance
01
= 180 pF ± 20% tolerance
03 = 370 pF ± 20% tolerance
04 = 830 pF ± 20% tolerance
05* = 1300 pF ± 20% tolerance
*not applicable for HDF
Mounting style
A1 = Riveted through hole for cable mount Shell without sealing frame
B2 = M3 threaded insert
B3 = 4-40 UNC threaded insert
B4 = Threaded lock for M3 front mounting
B5 = Threaded lock for 4-40 UNC front mounting
E1
= M3 threaded rear spacer with PCB clip, PCB .063" 1.60 mm
E2
= 4-40 UNC threaded rear spacer with PCB clip, PCB .063“ 1.60 mm
S1
= Metal bracket, M3 threaded insert
S2
= Metal bracket, 4-40 UNC threaded insert
S3
= Metal bracket, M3 threaded insert and PCB clip
S4
= Metal bracket, 4-40 UNC threaded insert and PCB clip
R1 = Metal bracket, M3 threaded insert
R2 = Metal bracket, 4-40 UNC threaded insert
R3 = Metal bracket, M3 threaded insert and PCB clip
R4 = Metal bracket, 4-40 UNC threaded insert and PCB clip
Quality class Plating code for contacts
A
= Quality class 3 = 50 mating cycles
B
= Quality class 2 = 200 mating cycles
C
= Quality class 1 = 500 mating cycles
Termination
M
= Solder cup only for STF
R
= Solder pin, straight
T
= Solder pin, angled, .189“ 4.80 mm only for STF
U
= Solder pin, angled, .276“ 7.00 mm only for STF
Z
= Solder pin, angled, .465“ 11.80 mm only for STF
Y
= Solder pin, angled, .220“ 5.60 mm only for HDF
OX = Standard
IP67 Filter D-SUB Connectors