Characteristics, N 18 ghz, Electrical characteristics – Northern Connectors Radiall N Series Coaxial Connectors User Manual
Page 10: Mechanical characteristics, Environmental characteristics, Materials, Plating
www.radiall.com
12-10
N 18 GHz
CHARACTERISTICS
Test/characteristics
Values/remarks
ELECTRICAL CHARACTERISTICS
Impedance
50Ω
Frequency range
DC - 18 GHz
Typical V.S.W.R.
straight connector
right angle connector
With SHF cables
1.10 at 18 GHz
1.15 at 18 GHz
Insertion loss
< 0.1 √F (GHz) dB
RF Leakage
- 90 dB (2 to 3 GHz)
Insulation resistance
5000 MΩ min
Contact resistance
outer contact
inner contact
After environment test
2 mΩ max
N.A.
Initial
1.5 mΩ max
2 mΩ max
Peak power (at sea level)
5000 W
Average power (at sea level, 25°C)
2000 W at 0.1 GHz
600 W at 1 GHz
150 W at 10 GHz
.085" semi-rigid cable
.141" semi-rigid cable
Dielectric withstanding voltage
at sea level
at 70 000 feet
1000 Vrms
250 Vrms
1500 Vrms
375 Vrms
Voltage rating
at sea level
at 70 000 feet
335 Vrms
85 Vrms
500 Vrms
125 Vrms
RF high potential withstanding voltage
670 Vrms
1000 Vrms
Corona level
250 Vrms
375 Vrms
MECHANICAL CHARACTERISTICS
Durability
500 matings
Cable retention force
136 N (31 Ibf)
272 N (61 Ibf)
Recommended coupling torque
160 Ncm (14 Ibf.in)
Contact captivation
27 Ncm (6 Ibf) min
ENvIRONMENTAL CHARACTERISTICS
Temperature range
Standard connectors
- 65°C + 165°C
Connectors for semi-rigid cable
- 40°C + 125°C
Vibration
MIL-STD-1344 Method 2005 Condition 4
Shock
MIL-STD-1344 Method 2004 Condition G
Thermal shock
MIL-STD-1344 Method 1003 Condition A
Corrosion (salt mist)
MIL-STD-1344 Method 1001 Condition B
High temperature test
CECC 22000/4.7.2
Damp heat
CECC 22000/4.6.6
Low pressure immersion
EN2591 AECMA TestC14
Resistance to fluids contamination
EN2591 AECMA TestC15
MATERIALS
Body
Stainless steel
Center contact
Beryllium copper and brass
Coupling nut
Brass
Insulator
PTFE or polyetherimid resin
Gasket
Fluorosilicon or fluorocarbon
PLATING
Body
Passivated
Center contact
Gold
Coupling nut
Nickel