NTi Audio M2230-WP - Manual (Page 11)

11
Outdoor Microphone
Assembling
This chapter describes how to assemble the M2230 Measure-
ment Microphone into the WP30 weather protection kit:
Install ASD Cable
Feed the female XLR of the ASD Cable through the bottom •
of the lower body tube.
Attach the footer plate to the lower body tube using the three
•
allen screws, feeding the cable through the side slot of the
footer plate.
Insert M2230 Measurement Microphone
Connect the M2230 measurement microphone to the fe- •
male XLR of the ASD Cable.
Insert the M2230 measurement microphone into the upper
•
body tube so that the bottom end of the microphone is in line
with the bottom end of the upper body tube. Align the fixing
screw hole of the upper body tube with the lower screw
of the M2230 measurement microphone (remove the fixing
screw to see the lower screw head through the fixing screw
hole).
Fixing Screw Hole
Lower screw
of M2230
measurement
microphone