NTi Audio Minirator MR-PRO - Manual (Page 25)

25
Calling up configurations
Use the rotary wheel to select CONFIG in the menu bar. •
Confirm with “Enter”. •

The following menu is opened:
Select “Recall” and confirm with “Enter”. •
Select the desired configuration in the Selection menu and •
confirm with “Enter”.

You have now loaded the desired configuration.
Transferring configurations to another device (MR-PRO)
With the MR-PRO, you have the possibility of transferring
stored configurations to another device.
Connect your MR-PRO to a computer via USB. •

A removable memory drive will be indicated on the
computer.
Select the CONFIG sub-folder. •

You will see the stored configurations of your MR-PRO.
Copy this data to your computer. •
Connect another MR-PRO to the computer via USB. •
Copy the previously copied data into the CONFIG sub-folder •
by overwriting the data therein.

You have now transferred configurations from your MR-
PRO to another MR-PRO.
Operation