NTi Audio Minirator MR-PRO - Manual (Page 39)

39
Meas. Functions (MR-PRO only)

The following is displayed on the screen:
The cable has not been
plugged in correctly. Check the
cable connection.
The tested cable is defective,
the pins 2 and 3 are crossed.
Other error indications may ap-
pear depending on the cables
fault.
The tested cable is OK.
Cable Test Plug
For long cables already in place, NTi Audio
offers an optional adapter named “Cable
Test Plug”. Plug one end of the cable into
the Cable Test Plug and the other end of the
cable into the MR-PRO.
Order information:
Cable Test Plug
NTi Audio # 600 000 311