NTi Audio Minirator MR-PRO - Manual (Page 36)

36
Meas. Functions (MR-PRO only)
2
1
3
R2
R3
XLR
RCA
MR-PRO
The impedance and balance measurement
can only be carried out down to a defined
minimum level. If the measurement cannot
be carried out, the display shows:
Balance Display
The balance display allows localizing a number of typical faults,
such as short-circuits and defective cables.
In the case of an unbalanced impedance distribution, the dis-
play arrow points to the pin with the higher impedance.
Balanced impedance, R2 = R3
Unbalanced impedance, R3 > R2
Unbalanced load relationships can be analyzed further by se-
lecting the impedance display with the rotary wheel. If the im-
pedance cannot be measured, the display shows “---” instead
of the measurement value.