NTi Audio Minirator MR-PRO - Manual (Page 43)

43
8. Tips and Troubleshooting
Resetting to the factory settings
If the Minirator reacts unexpectedly, a reset to the factory set-
tings might solve the problem.
Switch the instrument off. •
Hold down the “ESC” button and simultaneously operate •
the “On/Off” button.

The confirmation of the reset is displayed on the screen.
Reloading wav-files (MR-PRO only)
You can reload the wave files of the MR-PRO that were in-
stalled in the factory.
The files are available at the Minirator support page
“http://my.nti-audio.com”.
Troubleshooting
Behavior with low-impedance loads
The maximum output current of the MR-PRO is 10 mA. If the
connected load consumes more current, the internal regulation
of the MR-PRO reduces the output level. This condition will
be indicated on the screen by the blinking of the output level
display:
.
PC recognizes Minirator as GPS Camera
The MR-Update Software may not recognize the Minirator at
PCs with Windows 7 installation.
Open the device manager. •
Select with the right mouse button the GPS Camera driver, •
select “Properties“ -> “Driver” -> “Update Driver”.
Select „Search the compute for driver software“.
•
Select “Select driver from list …”. •
Select Minirator driver “atm6124.sys ATMEL AT91xxxxx •
Test Board“.
Complete the Minirator driver installation.
•