Opticon XPT 3125 - Manual (Page 3)

CAUTION: This user’s manual may be revised or
withdrawn at any time without prior notice.
Copyright 2006
Opticon Sensors Europe B.V.
All rights reserved.
This manual may not, in whole or in part, be copied,
photocopied, reproduced, translated or converted to
any electronic or machine readable form without prior
written consent of Opticon Sensors Europe B.V.
BY OPENING THE PACKAGE OF THIS PRODUCT
YOU AGREE TO BECOME BOUND BY THE
LIABILITY AND WARRANTY CONDITIONS.
IN ALL CIRCUMSTANCES THIS MANUAL SHOULD
BE READ ATTENTIVELY, BEFORE INSTALLING AND/
OR USING THE PRODUCT.
Serial number
A serial number appears on all Opticon products. This
official registration number is strictly related to the
device purchased. Make sure that the serial number
appearing on your Opticon device has not been
removed. Removing the serial number might affect the
warranty conditions and liability disadvantageously,
so please be strict at maintaining the label with serial
number on the Opticon product.
Warranty / Warranty period / Liability
Unless otherwise agreed in a contract, all Opticon
products are warranted for a period of two years
after purchase, covering defects in material and
workmanship. Opticon will repair or, at its opinion,
replace products that prove to be defective in material
or workmanship under proper use during the warranty
period. Opticon will not be liable in cases where
modifications are made by the customer. In such
case the standard repair charge will be applicable.
The standard charge for repair will also be applicable
in cases where no defect is found at all. These rules
also apply for products that are still under warranty.
Under no circumstance Opticon Sensors Europe B.V.
will be liable for any direct, indirect, consequential or
incidental damages arising out of use or inability to use
both the hardware and software, even if Opticon has
been informed about the possibility of such damages.
Packaging
The packing materials are not harmful for the
environment. We recommend that you save all packing
materials, as it should be used whenever you need
to transport your scanner (eg. for service). Damage
caused by improper repacking is not covered by the
warranty.
Trademark
Trademarks used are property of their respective
owners.
version 04-2006
LIMITED WARRANTY AND
DISCLAIMERS
INSTALLATION
INSTRUCTIONS
FIRST STEP: TURN POWER OFF !
• Exercise caution at all times when working with AC and
DC-powered
equipment.
• Turn off all your equipment before installation.
• It is strongly recommended to use Opticon cables and power
supplies.
NEXT STEPS: CONNECT INTERFACE
• Find your interface type in the corresponding diagram
• Connect the scanner to the computer in accordance with the
diagram and corresponding Instructions.
• Turn your computer equipment on.
When using a battery powered scanner, charge the battery
before use.
DIAGRAM AND INSTRUCTIONS
See diagram on the left side of this page.
Connection CABLED:
1. RS 232 interface cable connection
DB9/DB25: Plug connector into the host.
If power is required: Connect external power supply.
2. Keyboard wedge connection
Disconnect the keyboard.
Plug the male side to the host. Plug the female side to keyboard.
If power is required: Connect external power supply.
3. USB cable
Make sure your computer runs Windows 98 or higher.
Plug USB connector of scanner into the host.
If power is required: Connect external power supply.
4. Test: read bar code
Read the OPTICON bar code and check the result at the host.
Connection WIRELESS:
A. Cradle connection
• USB interface remark: Download USB driver from www.opticon.
com and install the driver on the host.
• Interface connection: Connect the interface cable cradle to the
cradle and to the host. Connect always one type of interface. (Do
not connect for example both USB and RS232).
• Power connection: Connect the power supply to the cradle and
the main socket.
B. Wireless connection between scanner and cradle
Scan the label with device address on the bottom of the cradle,
to connect scanner to cradle.
C. Test: read barcode
Read the OPTICON bar code and check the result at the host.
If you have any questions, please contact your local dealer or
Opticon.