Appendix b: demo barcodes – Opticon ESL User Manual
Page 40
Opticon ESL
DEMO KIT
User Manual
40
Make sure the Unique ID field is correctly set in the <ImageFile> field of the information
template.
Make sure the field numbers in the image layout template are correct.
Appendix B: Demo barcodes
The quickest way to setup an ESL demonstration is to simply use the included sample
database and example templates. After installation of the software and hardware, the only
configuration step necessary are configuring the IP address of the base station and the
serial port of the barcode terminal in the Setup windows of the ESL server application. After
that, the demo database file should be automatically sent to the barcode terminal and then
you can link your ESLs using the barcode terminal and the product barcodes in the images
below. (See chapter 7).