Orbit Baby Infant Car Seat G2 and Base G2 - Manual (Page 28)

Installing the Car Seat Base and Car Seat
54
54
54
54
Installing the Car Seat Base and Car Seat
55
55
55
55
FALL HAZARD: Grasp the car
seat by BOTH carry handles when
removing it from the car seat base.
PINCH HAZARD: Clear your
child’s fingers and hands from the
carry handle area before removing
the car seat.
⚠WARNING⚠
Death or Serious Injury Can Occur
Rotating and Removing the Car
Seat from the Car Seat Base
Notes
A
B
C
1. Grasp the car seat firmly by both carry
handles (Photo A).
2. Squeeze either release lever upward
(Photo A and B). As you squeeze
the release lever, the car seat can be
rotated.
3. While still squeezing the release lever(s),
lift the car seat out of the car seat base
(Photo C) and remove it carefully from
the vehicle.