Pavement Ends 44583 Flip Top - Manual (Page 8)

44583 pg 8 Rev. D 0210
Horizontal Rod
Windshield
Bracket
Slide rod into bracket
until pin pops up
Horizontal Rod
Vertical Rod
Step Seven
I
NSTALL
H
ORIZONTAL
R
OD
Slip the end of the Horizontal Rod into the tube on the Windshield Bracket until the spring button on the rod pops up
through the hole in the Windshield Bracket.
Step Eight
I
NSTALL
V
ERTICAL
R
OD
Place the bottom of the Vertical
Rod into the hole at the front of
the Side Belt Rail. Bolt the rod
to the Horizontal Rod on the
Bow Assembly with the Screw
and Nut attached to the
Horizontal Rod.
Side Belt Rail
Vertical Rod
Place Vertical Rod
into hole
Front Bow
Rear Bow
Note: The pin must pop up through the hole in the Windshield Bracket for proper fit.