Paxton Net2 Entry - Extension switch - Manual

0 V 0 V 12V PSU
Port
1
Port
2
Port
3
Port
4
Port
5
12V 0V
Power
Ethernet
PoE 1
PoE 2
PoE
3
PoE 4
Power over
Ethernet
IEEE
802.3af
PoE Extension switch
INPUT AC 100-240V
50 / 60 Hz
1.2A
OUTPUT DC 13.8V 2A
23/07/2012
Ins-30203 Net2 Entry - Extension switch
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
Description of product
The Net2 Entry extension switch allows more monitors to be connected to the Net2 Entry system. It is connected
to the system using one of its network ports and communicates using IPv6.
Paxton recommend that the network cable is run
to each location and terminated in a network box.
A patch cable should then be used to link the unit
to the network. This makes unit replacement or
removal for building maintenance much easier.
1
2
3
4
1. PoE Switch ( 4 PoE + 1 standard port )
2. 2A 12V DC power supply
3. Battery backup ( not supplied )
4. Plastic cabinet