Paxton Net2 Entry - Extension switch - Manual (Page 4)

236 mm 320 mm 80 mm
12v DC
2A
4
1
0 °C 45 °C
Specifications
Operating temperature
Electrical
Environment
Dimensions
Max
Width Height Depth
Features
Indoor use only IP Rating
Min
Min
Min
Max
Max
PSU output voltage
PoE network ports IEEE 802.3af
Standard network ports
See also: AN1127 - Net2 Entry - Planning and installation < http://paxton.info/1896 >
PSU output current
This extension switch should be used in conjunction with a Net2 Entry control unit(s) and other PoE switches as
required to provide the power and network connections for the Net2 Entry devices.
Power up the extension switch.
The Net2 Entry units will power up using the PoE provided by the extension switch.
Installation
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to the standard EN55022, when using UTP (unshielded twisted pair) category cable. In order
to comply with the limits for a Class B digital device it is necessary to use FTP (foiled twisted pair) or
STP (shielded twisted pair) category cable on the PoE/network ports.