Paxton Net2 Entry - Monitor - Manual (Page 8)

Page 8
Operation - Do not disturb mode
Message settings
Visitors can be stopped from calling the monitor
by putting it into 'Do not disturb' mode.
If the screen is blank, touch the screen to display
the menu.
Touch the 'Do not disturb' option. The button will
illuminate red.
Touch the button again to
exit this mode.
Alarm display
Alarm messages will display to the user at the
monitor if the option has been set in the local
Installer screen.
The user may view the camera to investigate the
alarm.
Note: Door left open alarms will only be available if
Net2 Entry is connected to a Net2 system. The Net2
system must be running v4.25 software or later.
Greeting - Record a greeting to be played at the
panel when not answered.
On/Off - Turn video voicemail on and off at this
monitor.
Timestamp - Once set, new messages will be
identified by the time and date left.
See AN1136 for more information on setting up
video voicemail.
* Only when connected to Net2