Paxton PROXIMITY LCD reader demonstration unit - Manual (Page 2)

Page 2
This unit has been loaded with demonstration software to display the four stored
images in response to the presentation of a user token.
These images may be replaced by the user via the Net2Air dongle supplied with the
unit and an Uploader program available from our website.
Simply power up the unit and present any Paxton or EM4100 token.
The 'Present token' image will change to the next image in the user sequence and
after a short pause, return to the default 'Present token' image.
The user images are: Access granted, Enter PIN, Access denied.
The following pages contain full instruction issued with the PROXIMITY LCD reader
and the Net2Air USB dongle. There are also details on the LCD reader image
uploader.
These include the following procedures:
- Mounting the LCD reader.
- Commissioning.
- Default images.
- Creating and customising your own images.
- Installing the Net2Air USB dongle.
- Downloading the LCD reader image uploader.
Operation