Paxton PROXIMITY P series compact reader - Manual (Page 3)

Issuing tokens
1. Across each double page there are pairs of cards - a user card and a corresponding shadow card.
2. Write the name of the user on the shadow card.
3. Take the user card from the opposite pouch and issue to the user.
4. Keep the card pack containing the shadow cards in a safe place.
1 2 3 4
User cards
Shadow cards
Bar a user
1. When a card is lost or stolen it is important to bar the card from your system to avoid unauthorized access.
2. To bar a card or token take it's corresponding shadow card from the card pack.
3. Present the shadow card to the reader. This will remove the lost card or token from your system.
4. A barred card can re-validated by presenting the enrolment card followed by the user card to the reader.
1 2
3 4
Fail open release card - Compact systems are fail closed as default
THIS CARD CAN ONLY BE USED WITH A FAIL OPEN LOCK.
1. Take the fail open release function card from the starter pack.
2. Present/swipe the card through the reader. The reader will beep for about a second.
3. The reader is now set to fail open mode. This allows safe operation of the door in case of fire: The lock will
release when the power is cut.
4. To revert to fail closed mode, swipe the card again and the reader will beep once.
1 2 3 4
BEEP!
BEEP!
This ca
rd is
used with
systems
where a
fail open
electric release is
used f
or the saf
e opera
tion in the
event of
a fire. Present
the ca rd to the reader
to
drive a
fail open
release
or a maglock.
Present th
e
ca rd again
to revert
to the f
ail closed opera
tion
Paxton A
ccess
FUNCTION
CARD
fail
open release
This ca
rd is
used with
systems where
a fail open
electric release is u
sed for the saf
e opera
tion in
the
event
of a fire. Prese
nt the card to the
rea der to
drive a
fail open release
or a maglock. Present
the
ca rd again to revert
to the fail closed
operation
Paxton
Access
FUNCTION
CARD
fail
open release
This card is used with systems where a fail open electric release is used for the safe operation in the event of a fire. Present the card to the reader to drive a fail open release or a maglock. Present the card again to revert to the fail closed operation
FUNCTION CARD
fail open release
1. Power down the unit.
2. Press and hold the exit button.
3. Power up the unit. It will give several quick beeps.
4. Wait for a further beep and then release and press
the exit button twice more.
5. The reader will beep 3 times to confirm the reset.
OR
1. Present Enrolment card.
2. Present Door open time card twice.
3. Present Enrolment card.
4. Present Door open time card twice.
5. WAIT FOR 5 SECONDS!