Paxton TOUCHLOCK compact stainless steel - Manual (Page 9)

Applications Page 9 of 11
Applications
Standard Installation
BLACK WHITE
240V a.c. From un-switched fused spur
1 2
3 4
5 6
7 8
9 0
ABC DEF
GHI JKL
MNO PQR
ST UV
WX YZ
Green wires must be insulated
white lock wires will drive up to
500mA continuous
(750mA for up to 7 seconds)
Positive wire is identified
by being ribbed or striped.
Total load must not exceed PSU capacity.
12V d.c.
TOUCHLOCK compact will operate
from 12V a.c. or 12V d.c.
12V a.c.
If the correct code is typed in the release is powered and the door unlocks.
Duress alarm
BLACK
WHITE
GREEN
+12V d.c.
Green output wires and
white lock wires drive up to
500mA continuous
(750mA for up to 7 seconds)
Positive wire is identified
by being ribbed or striped.
Total load must not exceed PSU.
240V a.c. From un-switched fused spur
Sounder / Bell
TOUCHLOCK compact will operate
from 12V a.c. or 12V d.c.
12V a.c.
+12V d.c.
1 2
3 4
5 6
7 8
9 0
ABC DEF
GHI JKL
MNO PQR
ST UV
WX YZ
Duress codes can be programmed into the keypad. When a duress code is entered the lock output will
activate for the door open time and the bell output will be activated for 30 seconds.