PIAA 004 Series - Manual (Page 3)

mounting hardware
bracket
adhesive pads (2)
"PIAA" must read right side up
LAMP
INSTALLATION
• The work site must be clean and level with enough working space to complete
the job without distractions.
• When mounting the lamps mount them in such a place that they are free of
obstructions. Do not mount the lamps in such a place that they will obstruct an
existing automotive function. Do not mount them in such a manner that they
have a chance of contacting the road or curbs.
• The PIAA 004 may be mounted upright or hanging down. It is very important to
make sure the "PIAA" that is molded into the lens reads right side up. If it will
not read right side up in its mounting location then the bracket will have to be
removed and repositioned so that it will mount right side up.
• When a mounting location is decided upon mount the lamp with the supplied
mounting screws, adhesive pads or other fasteners that will provide a secure
fitting to the vehicle.
• When lamp is mounted make sure to leave 1/8" clearance around the lamp for
proper heat dissipation and to protect painted surfaces from heat damage.