PIAA 510 Series - Manual

Installation Instructions
Thank you very much for purchasing PIAA product.
Please read this entire manual before installation and use of this product.
510
• Lighting laws vary state to state, check your local laws before use.
• The lamps get very hot when they have been in use. Do not touch them as they
may cause burns.
• After the lights have been on do not place them near flammable objects.
• Do not splash water directly on the hot lamps, as this may cause cracking of the
lens due to dramatic change in temperature.
• Do not look directly into the light of the lamps as the bright light may cause eye damage.
• This light system may be used only as high beam auxiliary lighting.
• The lamps and relay harness are to be used only with 12 volt automotive
electrical systems.
• Using this light system while the engine is not running will drain the battery.
• Do not repeatedly turn the light system on and off as it will shorten the life of
the system.
• Some automobiles generate high voltage at start up and when it is turned off, do
not have lights on as you start or turn off your vehicle.
• Using the wrong bulbs may cause a malfunction, use only specified PIAA bulbs.
• When changing bulbs or lenses follow the lamp assembly/disassembly diagram.
• Leave at least 1/8” clearance between the lamps and the front spoiler, as the heat
may damage the spoiler.
Please give this Installation Manual to customer after installing.
For Installers