PIAA 525 Series - Manual (Page 3)

LAMP
INSTALLATION
• The installation area must be clean, and level with enough working space
to do the job without distractions.
• The PIAA 525 lamps are designed to be mounted upright. It is very important
that you make sure that the “PIAA” etched in the glass reads right side up.
• When mounting the lamps mount them in such a place that they are free
of obstructions.
• Do not modify the lamp system in any way or it will void the warranty.
• Do not mount the lamp system in a place that may obstruct an existing
automotive function.
• Do not mount the lamps in a place that they will come in contact with the
road or curbs.
• When a mounting location is decided upon a 10mm hole will be needed to
mount the lamp via the mounting stud. If a hole is not available one will have
to be drilled.
• When lamp is mounted make sure to leave at least 1/8 inch clearance around
the lamp to avoid heat damage to front spoilers and/or grills.
PIAA logo must read
right side up.
2.