MacDon 742 HAY CONDITIONER - Manual (Page 120)

Form # 46290 Issue 09/05 118
UNLOADING & ASSEMBLY
ATTACHING HAY CONDITIONER
(continued)
18. Attach rear supports to forming shield assembly,
at the second bolt (P) from each end.
19. Attach top bracket of rear support to rear hole (H)
of the two provided in the tractor floorboard, each
side.
NOTE: For XX52 & XX52i Windrower Tractors,
use the longer top brackets provided. Use the
lower hole for mounting the rubber strap.
XX52 & XX52i
FORMING SHIELD SUPPORT STRAP