MacDon 5010 Mower Conditioner - Manual (Page 76)

74
MOUNT PUMP IN STORAGE POSITION
S
ATTACH SMV SIGN
UNLOADING & ASSEMBLY
ATTACH HYDRAULICS AND ELECTRICAL
(continued)
6. Tie wiring harness to motor hoses with 3 large
plastic ties evenly spaced. Secure any excess
harness with small plastic ties at (R) (see top
photo, page 72).
7. Remove top clamp (Y) and place 2-lift cylinder
hoses (U). Replace top clamp.
8. Mount pump (S) in storage position at front of
tongue.
INSTALL SMV SIGN
Install Slow Moving Vehicle sign at rear of unit with
hardware provided.
REMOVE SHIPPING BLOCKS
Remove and discard shipping blocks.
ATTACH WINDROWER TO TRACTOR
See "Attaching Windrower to Tractor" in Operation
section for details.
HOSE & HARNESS ROUTING