Quadrox WebCCTV User Manual - Manual (Page 33)

WebCCTV User Manual 33
Version 4.9 Series
3.3.1.2 Camera Wizard
To enter the Camera Wizard click the Edit or the Add IP Camera button in the Cameras
Screen. The Camera Wizard can consist of eight tabs with easy to follow instructions. Read
this chapter to learn all about camera settings.
The following Camera Wizard tabs are described in this chapter:
 Name & Type
 Connection
 Live view
 Recordings  Activity
 PTZ
 Virtual Patrol
 Users
By default, some of the settings are already selected. It is advisable to keep these
settings to assure the best performance.
Depending on the camera type (network or analogue) and camera model, some tabs
may not be present or may be disabled.
During the configuration, you may be asked to restart the server. This must be done
first before finishing the configuration to assure the proper working of the WebCCTV
server.
3.3.1.2.1 Name & Type
In this screen, you define the camera name, type and model of the camera.
Once the camera is added, you cannot change its type.
Name & Type (Network camera) Screen
Click Next to enter each camera and go to the next Camera Wizard screen.