Quadrox Remote POS - Manual (Page 14)

Serial Port POS User & Installation Manual 14
Version 4.4 Series
the name to the log file you specified in the Log File field.
o Port – Select the COM port to which the printer is connected.
o Incoming direction mode & Open serial port after monitoring started –
This only has to be configured when you got a Hardware POS that is
directly connected with a cable to the Video Server.
o Start Mask – The Start Mask is the expression or the number of symbols
from which the POS printer ticket is started. This information is needed for
POS Monitor to recognize the ticket and send it to the Video server for
further processing.
o Stop Mask – The Stop Mask is the expression or the number of symbols by
which the POS printer ticket is finished. This information is needed for
POS Monitor to recognize the ticket and send it to the Video server for
further processing.
If the Start mask or Stop mask of the ticket has nonprinting symbols (symbols which
are not represented on a keyboard but can be present in the POS ticket), please type the
corresponding Decimal codes instead, which are depicted in the Dec column of the
ASCII table that is below. ASCII Table is available when ASCII Table button is
clicked.
Use the following rule when specify the nonprinting symbols:
Use the following rule when specify the nonprinting symbols:
Enclose an ASCII decimal code of the corresponding nonprinting symbol into