RaySafe Xi View - Manual (Page 11)

11
RaySafe Xi View Manual – Using Xi View
Figure 7. FDD compensated dose values.
tHe wAVefoRMS AReA
1
2
3
4
5 7
8
6
9
Figure 8. Exposure waveforms. 1–4: Right click menu. 5–9: Marker info.
1: Put the waveforms on the clipboard or save them as a bitmap file.
2: Waveforms area settings.
3: Select which waveforms to show.
4: Show all available data.
5: Marker A (click on waveform to set).
6: Calculated values between marker A and B.
7: Marker B (shift-click on waveform to set).
8: Legend for marker A.
9: Legend for marker B.
if mA is measured simultaneously with radiation, it is possible to view both mA and radiation (or mA and kV)
waveforms in RaySafe Xi View (3 in figure 8).
Click on a waveform to set marker A (5 in figure 8). the measured values (kV or mA, relative radiation output in
%, and time) for the marked point is shown beneath the waveforms (8 in figure 8). Press the shift key and click
on the waveforms to set marker b.
Zoom in the waveforms with mouse wheel or up/down arrow keys. (Right click in waveforms area and choose
“UnZoom all” to reset zoom (4 in figure 8).)