RaySafe Xi View - Manual (Page 15)

15
RaySafe Xi View Manual – Hints
eRRoR MeSSAGeS
error MeSSAge ACtioN
Unable to open CoM #.
Please check your port settings.
• Check that your instrument is properly connected.
• Check the CoM port selection in RaySafe Xi View.
• Check in your windows settings that the CoM port
selected in the program is a valid CoM port for the
physical connection (cable or bluetooth).
the selected excel book or Sheet could
not be opened. Make sure that the excel book and Sheet selected in
RaySafe Xi View is open and editable.
Xi View could not connect to excel.
Make sure that none of the open excel
work books are in edit formula or edit cell
mode.
if you are editing a cell, press enter to confirm or esc to
cancel.
you can go through all sheets and press esc in all of them,
to make sure that none is in edit mode.
no exposure data or chart to copy. Make an exposure or open a file in Xi View format before
you try to copy, export or save.
no exposures to export.
no exposures to save.
there were unsaved exposure data found,
this might indicate that Xi View was not
properly closed last time it was used.
try to load this unsaved exposure data?
RaySafe Xi View will try to recover the last state.
Append the unsaved exposures to the last
used file? if a recovery of the state (above) resulted in unsaved
exposures and an open file, the program suggests to save
the exposures in that file.