Retsch MM 200 - Manual (Page 4)

5/21/2012 4 Retsch GmbH
Safety
Target group: All persons concerned with the
machine in any way
The MM 200 is a modern, highly efficient product of Retsch
GmbH, corresponding to state of the art. If the machine is
used according to the intended purpose with a knowledge of
this technical documentation it is completely safe and reliable
to operate.
Safety instructions
As the operating authority it is your duty to ensure that all
persons charged with working on the MM 200:
have read and understood all the instructions on
safety,
before beginning work know all the instructions
and regulations for the target group relevant to
their work,
have access to the technical documentation for
this machine at all times, without problems.
New personnel should be familiarized with safe,
proper handling of the machine before beginning
work on the MM 200, either by verbal instruction
from a competent person or through this
technical documentation.
Improper operation can cause injury to persons
or damage to the equipment. You are responsible
for your own safety and that of your employees.
Ensure that no unauthorised persons have access
to the MM 200.
For your own protection have your employees confirm that
they have been instructed in operation of the MM 200. The
draft of a suitable form is given at the end of the section on
safety.
We exclude any claims for damages of any kind for
injury to persons and damage to equipment arising
from non-observance of the following safety
instructions.