Retsch SM 100 - Manual (Page 36)

Cleaning and service
36
– Lift up the feed hopper safety guard
– Remove the feed hopper
– Remove the rotor
– Remove the sieve
– Remove the collecting receiver
– Remove the outlet flange
6.3.1 Clean the feed hopper
Abb. 23: Removing the feed hopper
Normally it is sufficient to clean the feed hopper through the fill shaft.
• To do this pull out the plunger (
B) and the metering plunger (C).
6.3.1.1 Lift up the feed hopper safety guard
Fig. 24: Lifting up the feed hopper safety guard
• Loosen the screw (
ES) on the feed hopper safety guard.
• Lift up the feed hopper safety guard.
If the feed hopper needs more thorough cleaning it can also be dismantled for
cleaning.
S
S
C
B