Retsch SM 300 - Manual (Page 29)

Assembling and using the cyclone
29
7 Assembling and using the cyclone
7.1 Cyclone assembly
CAUTION
3.V0014
Injuries to limbs
Rotating blade
–
Can cause injury to hands and feet.
• Keep hands and feet away from the device openings
when the device is switched on.
• Pull the plug out before cleaning or retrofitting.
CAUTION
4.V0001
Risk of injury to fingers
Reaching into the turning rotor
–
Unintended reaching into the grinding area and the turning
rotor.
• Never connect the device to the mains without the
discharge flange.
• Only operate the device with discharge flange.
Fig. 16: Removing the discharge flange
• Disconnect the device from the mains.
• Loosen the screw (A1).
• Pull off the discharge flange (AV).
A1
1
AV
1