BOXLIGHT CD-455m - Manual (Page 27)

19
Standby
When you press standby , the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 27 for details. The LED lights orange
while the projector is in standby.
• If you press standby again within 15 minutes, the projector
returns to normal operations immediately. The LED changes
from orange to green.
• If you press standby again after 15 minutes, there is about a
60 second delay before the lamp turns back on. The LED
flashes green while the lamp is re-lighting.
• If you don’t press standby again, the lamp turns off after 15
minutes. The LED lights orange while the projector is in
standby.
Volume (keypad only)
To increase the volume, press volume + . To decrease the vol-
ume, press volume - .
Volume adjustments are saved for each source you have con-
nected.