RKI Instruments 61-0198RK - Manual (Page 5)

61-1007RK/61-0198RK Carbon Dioxide Detector • 1
Overview
This manual describes the 61-1007RK CO
2
(carbon dioxide) detector. This manual also
describes how to install, start up, maintain, and calibrate the detector when used with a
gas monitoring controller. A parts list at the end of this manual lists replacement parts and
accessories for the CO
2
detector.
The 61-1007RK CO
2
detector includes a junction box. This manual may also be used for
the 61-0198RK CO
2
detector which does not include a junction box and is normally
mounted in one of a controller’s conduit hubs and factory wired to the controller. If you
are using a 61-0198RK CO
2
detector, disregard all references to the junction box and
junction box terminal block.
Specifications
Table 1 lists specifications for the CO
2
detector.
WARNING: When using the 61-1007RK, you must follow the instructions and warnings
in this manual to assure proper and safe operation of the 61-1007RK and to
minimize the risk of personal injury. Be sure to maintain and periodically
calibrate the 61-1007RK as described in this manual.
Table 1: 61-1007RK Specifications
Detection Range With Junction Box
61-1007RK-02: 0 - 5,000 ppm CO
2
61-1007RK-03: 0 - 5% Volume CO
2
61-1007RK-05: 0 - 50% Volume CO
2
61-1007RK-10: 0 - 100% Volume CO
2
Without Junction Box
61-0198RK-02: 0 - 5,000 ppm CO
2
61-0198RK-03: 0 - 5% Volume CO
2
61-0198RK-05: 0 - 50% Volume CO
2
61-0198RK-10: 0 - 100% Volume CO
2
Sampling Method Diffusion
Response Time 90% in 45 seconds
Accuracy ± 5% of reading or ± 2% of full scale (whichever is greater)