RKI Instruments 61-1001RK - Manual (Page 15)

61-1001RK Combustible Gas Detector• 11
NOTE: If you do not allow the gas reading to decrease below the alarm points, then
unwanted alarms may occur.
3. Verify that the controller display reading decreases and stabilizes at 0 %LEL.
4. Store the components of the calibration kit in a safe and convenient place.
Parts List
Table 3 lists replacement parts and accessories for the 61-1001RK hydrogen detector.
Table 3: Parts List
Part Number Description
18-0400RK-01 Junction box with spacers
NC-6205-01 Replacement hydrogen detector
71-0194RK 61-1001RK Hydrogen Detector Operator’s Manual (this document)
81-0002RK-01 Calibration cylinder, 50 %LEL hydrogen in air, 34 liter steel
81-0076RK-01 Zero air calibration cylinder, 34 liter steel
81-1050RK Regulator, 0.5 LPM with pressure gauge and flow control knob, for 17
and 34 liter steel calibration cylinders
81-1117RK Calibration cup