RKI Instruments 61-1007RKSS - Manual (Page 5)

61-1007RKSS Carbon Dioxide Gas Detector • 1
Overview
This manual describes the 61-1007RKSS CO
2
(carbon dioxide) detector. This manual also
describes how to install, start up, maintain, and calibrate the detector when used with a
gas monitoring controller. A parts list at the end of this manual lists replacement parts and
accessories for the CO
2
detector.
Specifications
Table 1 lists specifications for the CO
2
detector.
WARNING: When using the 61-1007RKSS, you must follow the instructions and
warnings in this manual to assure proper and safe operation of the
61-1007RKSS and to minimize the risk of personal injury. Be sure to
maintain and periodically calibrate the 61-1007RKSS as described in this
manual.
Table 1: 61-1007RKSS Specifications
Detection Range 61-1007RKSS-02: 0 - 5,000 ppm CO
2
61-1007RKSS-03: 0 - 5% Volume CO
2
61-1007RKSS-05: 0 - 50% Volume CO
2
61-1007RKSS-10: 0 - 100% Volume CO
2
Sampling Method Diffusion
Response Time 90% in 45 seconds
Accuracy ± 5% of reading or ± 2% of full scale (whichever is greater)