BT SYNERGY 4100 User Manual
Page 71
71
Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
No display
•
The batteries may be flat, dead or incorrectly inserted.
•
Recharge or replace the batteries.
icon flashes
•
Is the handset registered correctly to the base, see page 65.
•
Check that the mains power is correctly connected.
•
Check that the handset is within range of the base.
icon flashes
•
The batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
•
Try cleaning the charging contacts.
•
Check that the mains power is correctly connected.
You hear the busy tone when you press
•
Make sure the handset is in range of the base.
•
Another handset registered to your BT Synergy 4100 base may be on the line.
No Caller Display number/name displayed
•
Have you subscribed to a Caller Display service from your network provider, see page 40.
•
The caller may have withheld their number.
•
An exact name/number match was not found in your phonebook. Check that you have
stored the full STD dialling code.
Help