S&S Cycle Air Cleaner Kit 106-5130 for Victory Freedom Engines - Manual (Page 3)

9- Assemble and install breather hose as follows:
A- Cut the stock Victory® hose on the straight section just behind the 90 degree bend as shown in Picture 2.
B- Slide an S&S® supplied 1/2” hose clamp over the modified stock breather hose.
C- Install the S&S straight barb in Victory breather hose and position a hose clamp around hose end.
D- Slide the 90-degree end of breather hose over the brass barb on the air cleaner cover and slide hose clamp in place.
E- Position straight end of the S&S breather hose over the 1/2” barb to connect to the Victory hose. Slide clamp over connection.
F- See Pictures 3 and 4 for breather hose and barometric pressure sensor hose installation positions.
NOTE: S&S breather hose can be cut for best fit.
10- The S&S aluminum spacer replaces the stock Victory spacer between the frame and coil to ensure sufficient clearance between the air cleaner
and coil wires. See Picture 5.
Picture 2
Picture 5
Picture 3 Picture 4
3
S&S Coil Spacer
Breather hose layout
1 /2” Hose clamp (3)
1 /2” Straight barb
Modified stock breather hose