S&S Cycle Air Cleaner Kit 106-5130 for Victory Freedom Engines User Manual
Page 4
Advertising
11- Using the supplied 8”cable tie, secure the MAP sensor to the injector and coil wires as shown in Picture 6.
12- Using the supplied 4” cable tie, secure IATS and Throttle Position Sensor wires as shown in Picture 7.
13- Install remaining parts, reversing the order of removal and following instructions in your Victory service manual section Engine Removal &
Installation.
14- To avoid engine damage, S&S® recommends that the technician installing the air cleaner kit verifies that the motorcycle is running the proper
air fuel mixture.
15- Test drive vehicle to ensure proper operation and verify that there are no leaks.
4
Picture 7
Picture 6
Secure cable tie as shown.
MAP Sensor
Advertising