S&S Cycle Billet Air Cleaner Kit PN 106-5131 for Victory Motorcycles - Manual (Page 4)

4
Idle Air Control Cover and IAC Mounting Bracket Removal
1 – Moving to the opposite side of the motorcycle, remove the IAC cover from the motorcycle. Picture 5 illustrates the IAC cover.
2 – Disconnect the IAC from the main wiring harness at the connector pointed out in Picture 6.
3 – Disconnect and remove the fuel supply hose at the connector pointed out in Picture 6.
4 – Remove the four socket head cap screws from the IAC mounting bracket that holds the bracket to the front and rear heads. Picture 6 points
out the location of the four socket head cap screws.
5 – Remove the IAC mounting bracket and the IAC supply and delivery hoses all in one piece.
Throttle Body Removal
1 – Remove the throttle cables from the throttle body following your Victory® service manual for the specific model you're performing the work on.
2 – Remove the four socket head cap screws from the throttle body. Picture 7 and Picture 8 point out the socket head cap screws that need to be
removed.
Note: The four socket head cap screws that are removed will be used for attaching the new S&S® Air Cleaner.
Picture 5
Picture 6
Picture 7 Picture 8
IAC Cover
Fuel Supply Hose
IAC Connector
Socket Head Cap Screws Socket Head Cap Screws
Socket Head Cap Screws Socket Head Cap Screws