Salter 1085 BKDR MaxView Electronic Kitchen Scale - Manual (Page 2)

G
B
2
1) If using a bowl place on the platform before
switching the scale on.
2) Press ‘ON-ZERO’ until the display
illuminates.
3) Wait until the display shows zero.
USING THE SCALE
Your quality Salter scale has been designed especially for your convenience. It has the bonus features
of a timer, clock, room temperature and extra large viewing display.
The Aquatronic liquid measure feature is suitable for all water based liquids, including wine, milk, stock,
cream etc.
Note: Oils have a lower specific gravity, which will result in a volume reading of approx +10%. If
measuring oils by volume on this scale, please adjust for this accordingly.
USING THE AQUATRONIC FEATURE TO MEASURE LIQUID INGREDIENTS
To weigh several different ingredients, press ‘ON-ZERO’ to
reset the display between each ingredient.
TO ADD AND WEIGH
TO SWITCH ON TO CONVERT WEIGHT UNITS
To convert between grams (g), pounds and
ounces (lb.oz), millilitres (ml) and fluid ounces
(fl.oz) press ‘UNIT’ button at any time during
weighing.
Note: The room temperature will automatically
show °F when in the imperial (lb:oz/fl.oz)
weighing mode and °C when in the metric
(kg/g/ml) weighing mode.
Insert 4 x AA
batteries. Ensure +/-
terminals are the
correct way round.
BATTERY
1. Switch the scale on then press the ‘START-STOP’ button to obtain a 00:00 display in the
clock window.
2. Press the ‘SET’ button to increase the countdown time (from 1 to 99 minutes) – either use a
single press to advance one minute at a time – or press and hold to advance continuously until
button is released.
TO OPERATE THE TIMER
Scale operation
Scale reading
Clock/timer
Room temperature
Timer operation
1085_IB_AW_A5.qxd:Layout 1 21/4/09 14:45 Page 2