SATEC C192PF8-RPR - Manual (Page 70)

Chapter 7 Viewing Status Information 65
Table 7-2 PFC Operation Modes
Code Operation Mode
OFF The PFC is switched OFF
Sh.dn The PFC is shutting down
Aut.1 Self-adapting automatic operation mode
Aut.2 Optimizing automatic operation mode
HAnd Manual operation mode
Table 7-3 PFC Operation Status
Code Operation Status Description
ready Ready A switching program is complete
ALAr Alarm Operations are stopped by an alarm setpoint
busy Busy Waiting until a switching delay is expired
Lo.rEA Low reactive power
(automatic mode) Insufficient reactive power to trigger PFC
Ind.L Excessive inductive load
(automatic mode) Non-compensated inductive load
CAP.L Excessive capacitive load
(automatic mode) Non-compensated capacitive load
FULL Full (manual mode) All capacitor banks are switched in
IdLE Idle (manual mode) All capacitor banks are switched out
OFF OFF The PFC is switched off