SATEC PM296 - Manual (Page 43)

Chapter 4 Setup Menus 35
4.10 Display Setup Menu
This menu allows you to view and change display properties. Table 4-6 lists
available options with their code names and applicable ranges.
Table 4-6 Display Options
( ∗ default setting )
Display Code Parameter Options Description
UPdt Display update
time 0.1 - 10.0 s
(0.5)* Defines interval between display
updates
ScrL Auto scroll nonE*
2-15 s
Disables/enables auto scroll on
common measurements display
(main screen) and defines scroll
interval
rEtn Auto return to the
main screen diS*, En Disables/enables auto return to
the main screen after 30
seconds of uninterrupted use
Ph.P Phase powers
display mode diS*, En Disables/enables display of
phase powers in common
measurements (main screen)
Fund. Fundamental
values display
mode diS*, En Disables/enables display of
fundamental values in common
measurements (main screen)
dAtE Date format n.d.Y*
d.n.Y
Y.n.d
Defines the date format in the
RTC display: d=day, n=month,
Y=year
Each date format character is
set separately.
diSP
5
ScrL
diSP
0.5
UPdt
diSP
diS
rEtn
diSP
n.d.Y
dAtE
diSP
diS
Ph.P
diSP
diS
Fund.
SELECT CHG diSP ENTER ENTER