Schwank IT(U) - Manual (Page 16)

GP-MSEM-BX-06A
SEM(U) / IT(U) Manual
RD: Aug 2006
RL: 06A
KH
TABLE 4
MODEL
TURBULATOR
LENGTH
(IF REQUIRED)
SEM/IT 200-70/60/50 10’
SEM/IT 175-70/60/50 10’
SEM/IT 155-60/50 not required
SEM/IT 155-40 10'
SEMU/ITU 155-30 not required
SEMU/ITU 155-20 10’
SEM/IT 130-50 not required
SEM/IT 130-40 10'
SEM/IT 130-30 14'
SEMU/ITU 130-20 10’
SEMU/ITU 130-15 14’
SEM/IT 110-50 not required
MODEL
TURBULATOR
LENGTH
(IF REQUIRED)
SEM/IT 110-40 10'
SEM/IT 110-30 14'
SEMU/ITU 110-20 10’
SEMU/ITU 110-15 14’
SEM/IT 100-20 10’ S/S
SEM/IT 80-40 10’
SEM/IT 80-30 14'
SEM/IT 80-20 14'
SEMU/ITU 80-15 14’
SEMU/ITU 80-10 14’
SEM/IT 60-30 14’
SEM/IT 60-20 14’
SEMU/ITU 60-10 14’
NOTE: Where required the SEMU/ITU Series Heaters will be supplied with the turbulators,
snugly installed into the vent end tube (s) of the system configuration.
FIGURE 12 REFLECTOR ARRANGEMENTS
FIGURE 10 MOUNTING REFLECTOR END CAP
1 Reflector End Cap Flange
protruding over and under
the Reflector
2 Screws securing Reflector
to End Cap
3 Opening for Tube
4 Focus Shield Reflector
1 4
3
2
Page 12