Schwank agroSchwank - Manual (Page 13)

GP-MAGR-BX-06A
agroSchwank / IN Manual
RD: Sept 2005
RL: 6
KH
8.6 SUGGESTED MOUNTING DISTANCE FOR COMFORT**
** These mounting distances are suggested, and are subject to on sight conditions. If in doubt, please
contact your distributor.
Page 10
MOUNTING HEIGHTS:
agroSchwank
Distance to floor 6’ to 9’
8.7 HORIZONTAL suggested mounting distance for comfort.*
agroSchwank
Distance to floor 4’ to 8’
8.8 ANGLE suggested mounting distance for comfort.*
Note: Reflector with venturi must be in upper position
Since most installations will differ in many details, these instructions are general. Sound judgment must
be exercised and careful supervision is essential to assure the installation will be made in the best
manner possible for trouble-free operation and at minimal cost. All systems must be done in accordance
with acceptable practices, local codes, and applicable standards. This heater is suitable for reflector
mounting angles up to 45° along the short axis. Improper angle mounting can result in overheating of
controls and combustible materials.
IMPORTANT: For either horizontal or angle mounting, the long axis of the heater must be level. Use
only non-combustible mounting hardware.
NOTE: It is the responsibility of the installer to insure that the chosen suspension system will support at
least 50 lbs.