SDC Electric Power Transfer Door Loops - Manual

FOR WOOD AND METAL DOORS AND FRAMES
INTENDED FOR DOOR OPENINGS LESS THAN 120"
NOT INTENDED FOR CENTER HUNG DOOR APPLICATIONS
FRAME PREPARATION
10.25" L x 1.00" W x .75" D
TOP HINGE
REINFORECMENT
RECOMMENDED POSITION:
LOCATE BETWEEN TOP
AND MIDDLE HINGE
REINFORCEMENT.
7/8” FROM
OUTSIDE FACE
OF DOOR
EPT
PREPARATION
MIDDLE HINGE
REINFORCEMENT
TITLE: POWER TRANSFER BOX
DWG. NO.: INST-PT-5 DATE: 10-17-07
SECURITY DOOR CONTROLS
3580 Willow Lane
Westlake Village CA 91361-4921
Tel. 805-494-0622 FAX: 805-494-8861
MATERIAL:
MAKE FROM 14 GA STEEL w/CHROME PLATING
DRAWN BY: M. Scarpetta
PART NO. PT-5
NOTE: Due to various manufacturing techniques,
these dimensions may fluctuate slightly.
The field installer should double check these
dimensions against the actual component.
DOOR PREPARATION
1/2” DIA. HOLE x 7/8" DEEP.
1" #6 SHEET METAL
SCREWS (4 PLACES)
11-7/16"
10-15/16"
2"
NOTE:
ACCEPTS JACKETED CABLE
UP TO 5/16” DIAMETER
3/4
10-1/4
2X
.594