SDC Z7800 SERIES MORTISE LOCK - Manual

INSTALLATION INSTRUCTIONS
Z7800 SERIES MORTISE LOCK
SECURITY DOOR CONTROLS
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: [email protected]
P:\INSTALLATION INST\Electrified Lockset\INST-Z7800 03/05 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email [email protected]
1. Measure desired height from finished floor, mark a horizontal line on door and door edge.
2. Align template on edge of door with applicable horizontal at height line. Check the chart for drilling trim
holes on template and mark only holes for lock function being installed.
3. Mortise door edge according to measurements on installation template and drill proper holes for trim.
4. Recess for face plate, the dimension is: L 8-1/32" x W 1-5/16" x D 7/32".
A. Door Preparation:
of cylinder
of lockcase
of lever
or knob
Vertical centerline
C
Installation
template
C
L
C
L
C
L
L of
door edge
Height line
of lever
or knob
CL
7/32"
Scan Me for
Product Video •
Datasheet •
Price List •
CAD / Template •
Use QR Code Phone App