Sensaphone WEB600 Users manual - Manual (Page 35)

35
Chapter 7: output programming
relay oUtpUt wirinG
The WEB600 includes an SPST relay output that can be used to turn on a light, siren, or other device
whenever an alarm occurs. The output is a normally open dry contact that can be used for low voltage
switching. The relay is rated for up to 30VAC/VDC 1 Amp. A sample wiring diagram is shown below:
Batter
y
Backup
Ethernet
Power
Alarm
Zone
+ 1 –
Zone
+ 6 –
Zone
+ 5 –
Zone
+ 4 –
Zone
+ 3 –
Zone
+ 2 –
Relay
Output
The relay will engage whenever an input is above or below the programmed alarm limits and the pro-
grammed recognition time has been met. It will release as soon as the input returns to a normal condi-
tion.