Sensaphone IMS-4000 Upgrade instructions - Manual (Page 3)

IMS-4000 Software Update Notice
3
Version 3.0.16 (June 1, 2008)
• Corrected real time strip chart when values are negative.
Version 3.0.15 (May 12, 2008)
• Added programming support for new IMS-series sensors: Ultra-Low Temperature Sensor, 15A
Current Sensor and 20A Current Sensor.
• Added ability to set custom table values for 4-20mA sensors.
Version 3.0.14 (August 1, 2007)
• Software installation modified to support Microsoft Windows Vista.
• Added archiving message to the datalog download screen when the database gets large.
• Upgraded the HistoryView application. Archive files can now be viewed without loading them into
the current database. In addition, the archive process now provides the option to either retain or
delete the selected records from the current database.
• Corrected background color when graphing data within HistoryView on computers running
Windows Vista.
Version 3.0.13 (January 10, 2007)
• Modified the Holiday setup screen to reflect the current year on recurring holidays.
• Modified the Profile Setup screen to allow a null password to be entered.
• Corrected an issue in HistoryView which caused Normally Closed sensors to display as Normally
Open.
Version 3.0.12 (October 1, 2006)
• Corrected screen delay issue with Datalog download if record count was zero.
• Corrected potential issue with Datalog and Eventlog Auto-update feature which could have resulted
in missing records.
Version 3.0.9 (February 16, 2006)
• Addressed issue when storing history database on a remote server (requires IMS4K v2.89 firmware
or greater).
• Improved performance of Data and Event Log Download so that screens close faster (requires
IMS4K v2.89 firmware or greater)
• Changed minimum Webpage Refresh time to 30 seconds.
• Removed Calibration setting for battery channel(s).
• Changed User Code entry field so that it will only allow 4 digits to be entered.
Version 3.0.4 (August 23, 2005)
• Changed camera minimum snapshot interval to 2 seconds on Alarm Response screen.
Version 3.0.3 (May 12, 2005)
• Added support for password protected network cameras.
Version 3.0.2 (April 7, 2005)
• Added support to reprogram flash memory in new 10/100 Mbps version nodes. The software will
automatically display firmware files compatible with selected node.