Sensaphone IMS-1000 Users manual - Manual (Page 52)

IMS-1000 Manual
52
Voice Status Report and Touch-Tone Commands
The IMS-1000 is capable of delivering a spoken status report when called via telephone. The status
report can provide information on both environmental conditions and IP alarms.
Sample Status Report
To receive a status report, call the unit. The unit will answer and begin speaking and request your
User Code. If the unit receives a valid User Code it will continue with several menu options. A
sample of the main menu is shown below:
Hello, this is the IMS-1000 - "this the ABC Federal Savings Bank at 1040 Chestnut Street"
(custom voice message)
Enter your User code. {valid code is received}
No alarms exist.
For an Alarm Summary Report, Press 1
To listen to an Environmental Status Report, press 2.
To listen to an IP status report, Press 3.
To play or record a voice message, Press 4.
To control the Relay Output, Press 5.
To repeat this menu, Press 0.
If the caller had selected option 1 they would hear an environmental status report. The alarm sum-
mary only reports on inputs and IP alarms that are currently beyond their limits, or are in an alarm
condition. A sample of an environmental status report is listed below. Items in italics are custom
messages recorded by the user.
Channel 1, temperature in the server room, is 76.4 degrees Fahrenheit, normal
Channel 2, temperature in rack B, is 82.7 degrees Fahrenheit, too high
Channel 3, humidity in the server room, is 33.9%, normal
Channel 6, water under server room floor, normal
Channel 7, smoke alarm in the server room, normal
The power is ON
The battery is 100%, normal
Voice Alarm Dialout
The IMS-1000 can call and deliver an alarm message in spoken English. After dialing, the unit
will begin speaking “IMS-1000 Alarm Message, Press any key to continue.” If the unit receives a
touch-tone, it will recite the alarm message. When it finishes speaking the message it will request
acknowledgement. A sample Voice Alarm call is shown below:
“Sensaphone Alarm Message, press any key to continue”
“Sensaphone Alarm Message, press any key to continue” {call is answered and a 5 is pressed}
“IMS-1000 Alarm Message. The temperature is High at the IT Dept of XYZ Company.”
“Channel 1, temperature in the server room, is 81.5 Degrees Fahrenheit”
“Level crossed limit of 80 Degrees Fahrenheit at 7:45PM.”
"To repeat press *"