Sensaphone 2800 - Manual (Page 40)

Sensaphone 2800 Manual
38
2. Press the SET key.
The 2800 will respond “enter zone number”.
3. Press the wireless sensor zone number (5-8).
The 2800 will respond “Wireless sensor x erased”. The
led for the selected wireless sensor should turn off.
Wireless Sensor Diagnostics
You can get detailed diagnostic information for each wireless sen-
sor to assist in determining if your wireless sensors are operating
properly. The information available includes: battery condition, DC
power status, signal strength, and wireless data error rate.
To get Sensor Diagnostics:
1) Press WHAT IS.
2) Press SENSOR ON/OFF.
The 2800 will say “Enter zone number”